Nanotechnology and the Future With Clean Energy

15-07-2010 by admin

Harnessing the power of tidal currents has the potential to provide unheard of clean, renewable energy production. Nanotechnology, with its innovative approach and non-surpassed success rate, may be the conduit needed to perfect the viability of ocean-current power as an alternative energy source.

Ocean currents are a natural phenomena located along most coastlines. The only requirement for harnessing their power is that the currents amalgamate under the surface of the ocean at depths of between eighty to two hundred and thirty feet (25 – 70 meters) with a flow of between five to ten feet per second. Harnessing this type of natural energy production it is not only a feasible undertaking, but is also quite an efficient way of supplying a clean, alternative energy source.

Although tidal power is an amazing concept, wave power also offers a much needed link to cheaper, cleaner power and its availability and conversion is being investigated vigorously in the ongoing race to market an economical, clean, renewable source of energy. Concerting above ground wind turbine units to meet undersea performance is technologically possible and, with a few adjustments, present day wind turbines are easily adapted to harness the awesome power of the sea.

Physicists have studied the gravitational pull of the moon and its effect on ocean currents for eons. Ocean tides are predictable, constant, natural occurrences that are easily forecasted for years in advance. This awesome and essentially untapped source of alternative power is not negatively affected either by adverse weather conditions or climate changes – which makes it ideal for further investigation and implementation.

In order to harness the full power of the ocean, nanotechnology may be just the ticket needed to successfully construct man-made tidal dams designed to control the flow as the tides ebb and recede. Predetermined openings would allow ocean currents to flow up through these gaps into a bay or estuary where the water is collected in the dam-like barrage and then released via a series of sluice gates and through a turbine which in turn generates electricity.

This alternative energy source is well established in La Rance France where a 240 megawatt facility has been operating since 1966. In addition, other, smaller sites have also garnered some success in Canada and in South Korea plans are underway to construct a plant larger than the one in France. However, there is one drawback to this type of power harnessing. Naturalists and environmentalists are concerned with the effects that constant flooding of the barrages has on the delicate ecosystems within the bays and estuaries where they are located.

Nanotechnology scientists are working in close liaison with forward thinking ecologists to correct this deficiency by designing a type of tidal lagoon to house the turbines. Instead of creating dams within the estuary itself, they propose to take advantage of strides in nanotechnology in order to erect man-made lagoons just off shore which would be built up from the seabed and reach out at least one meter above the high tide level. In this type of construction, the turbines would be situated in a wall close to, but not interfering with, the seabed itself. The concept is simple and very effective: the water would flow in through the turbine during high tide filling the lagoon, at low tide the flow would be reversed and the turbines turned in the opposite direction. The result is a generation of electricity in both directions four times a day. Careful placement of the lagoon would be determined by the differential between the maximum heights achievable between high and low tides. Producing energy by this means is anticipated to cost less than any coal fired facility, while protecting and encouraging a positive ecological environment.

Plans are underway to begin construction in several locations off the coast of Wales and China. This combination of conventional technology in partnership with nanotechnology advances has put environmental and ecological issues to rest, yet there is still a viable concern that this type of energy plant may have an adverse effect on shipping lanes. However, these concerns have also been considered and development of barrage ocean turbines that operate independently with little or no interference to ship traffic is well into production stages.

Because narrow passages promote the fastest movement of currents, the feasibility of harnessing huge amounts of power via ocean turbines offers an excellent alternative to nuclear and coal fired energy generating plants. With the reduced threat of ecosystem damage, advanced technology, co-operation between industry and environmental agencies and the almost unlimited locations that can potentially provide ideal conditions for tidal/ocean power harnessing, this type of energy source is generating serious attention worldwide.

Therefore, this begs the question: Is it really necessary to expose our planet and its people to constant ecological threat by continuing to provide nuclear power and its associated danger to the environment? The answer is, unequivocally – No. For those of us who care about living in a cleaner, safer world, it is imperative that we embrace nanotechnology assisted methods of energy generation which are proven to exceed present energy output while reducing the threat of pollution and destruction of our ecosystems.

The Role of Nanotechnology in Textile Chemicals Industry

13-07-2010 by admin

The role of nanotechnology in textile industry has accelerated with a positive momentum during the recent past years. Textile companies have been spending ample in research and development activities in order to discover appropriate products, and add innovations to their existing ones. In fact, textile industry is the first manufacturing industry to come up with finished products that are enhanced through nanotechnology-based products. Nanotechnology has versatile applications in Textile Chemicals industry in manufacturing garments with stain resistance, flame retardant finishes, wrinkle resistance finishes, moisture management, antimicrobial qualities, UV protection, and soil release properties, etc.

Fibre2fashion has got feedback from the Schoeller Technologies AG, one of the leaders in Nanofinishes from the textile industry regarding the role of Nanotechnology in textile industry.

The leaves of certain plants always stay clean, because dirt cannot adhere to the finely- structured Surfaces and is easily washed off by rain.

The natural non-stick, and cleaning process, also known as the self-cleaning effect, is permanently transferred to the textile surface by means of nanotechnology.

The result is NanoSphere an ecologically clean textile finish, developed in accordance with the bluesign standard.

Water and stains have no chance:

Water and annoying stains have no chance on textiles with a NanoSphere finish. The nanotechnology-based textile impregnation is characterized by a high level of water resistance, a natural self-cleaning effect and a durable protective function.

Advantages:

• High level of water resistance

• Naturally self- cleaning

• Durable protective function

High level of water resistance:

On NanoSphere textiles, water drops, e. g. when it is raining steadily, runoff simply and reliably

Naturally self-cleaning:

Oil, dirt and dust do not adhere to the NanoSphere surface and can be rinsed off with water.

Durable protective function:

Due to the extremely high level of abrasion resistance, the NanoSphere protective function is retained even with heavy duty use, frequent washing or cleaning.

The NanoSphere-finish when compared to other traditional textile finishes has a very high level of both wet and dry abrasion resistance.

Durable protective function:

• Normal washing or dry cleaning.

• Garments with NanoSphere finish can be washed and dry cleaned very easily.

• After 50 washing cycles the function still remains.

• Fabric softeners or dryer sheets are not recommended.

• Ironing or Tumbling.

• Heat and ironing recommended for optimum function.

NanoSphere is based on blue sign standard:

This NanoSphere technology is based on the blue sign standard, and guarantees the highest possible exclusion of substances which are harmful to human so the environment and promotes the economical use of resources in manufacturing.

• Elimination of all problematic substances

• Nano particles are fixed into a coating matrix.

• First class hygienic working conditions.

NanoSphere advantages at a glance:

• Uniquely repels water and stains.

• High level of abrasion resistance.

• NanoSphere offers reliable protection and lots of comfort

• The function is maintained even after numerous washing or cleaning cycles.

• NanoSphere can be applied on all types of textiles (cotton, synthetics etc. )

• Look, feel and breath ability are not affected.

• Ecologically clean textile finish developed in accordance with the bluesign standard.

Nanotechnology Unfolds Futuristic Green Cars

11-07-2010 by admin


Automakers are constantly incorporating the most advanced technology in their lineup. This time around they are planning to use nanotechnology to come up with spectacular vehicles. Two of the most sought-after vehicles are Acura FCX 2020 Le Mans and Volkswagen Nanospyder.
Recently, automakers have unleashed their environment-friendly concept cars that are expected to be manufactured using nanotechnology. The latter is a technology of building tiny machines using functional systems at a molecular scale. According to experts, nanotechnology, in its original sense, means projected ability to assemble items from the bottom up, utilizing techniques and tools being developed these days to make complete, high performance products.
Nanotechnology works from the bottom to the inside of the machine called personal nanofactories (PNs). Using mechanochemistry, nanotechnology will facilitate control at the nanometer scale. A nanometer is one billionth of a meter. Basically, it is about the width of 3 to 4 atoms.
One of the striking future cars presented is FCX 2020 Le Mans from Acura. Said car is envisioned to be powered by advanced auto parts from the automaker. It will also be using Honda car accessories to boost its ergonomics and comfort.
Acura FCX 2020 Le Mans appears like a Batmobile. The difference is that it uses lightweight and recyclable materials. Moreover, it is equipped with a hydrogen fuel cell drivetrain that makes it an environment-friendly car. Its molecular nanotechnology made it lighter and more manageable than present day cars.
Another viable future car is Volkswagen Nanospyder. The captivating car is made up billions of spore-like nanobots. The car is inclusive of mouth, eyeballs and other Volkswagen car accessories including tiny logos.
One of the exciting features of this VW Nanospyder is the ability of its lead bots to pick up impending collisions. Aside from that, the information can be sent away to support particular sections of the car.
Analysts in the auto industry are expecting a greener car future because of nanotechnology. In fact, there have been interesting concept cars submitted in the upcoming Los Angeles Auto Show’s Design Challenge. The latter is a competition designed to cover future cars that are environment-friendly. Mechanics of the competition include originality, safety, environmentalism and relevancy to Southern California’s ‘green’ lifestyle.

Nanotechnology – Development in Water-based Technology

09-07-2010 by admin

Nanotechnology is an applied science, which deals in microscopic engineering of machines, bots and drugs. Nanotechnology mainly deals with structures that have measurements in nanometers. With the help of nanotechnology, it has become possible to control and make changes at the molecular levels of any compound.
 
Due to evolution in nanotechnology, it has become possible to develop various techniques that may help people in the future. There are several developments taking place in the field of medicines, physics, chemistry and other such fundamental sciences due to nanotechnology.
 
Nanotechnology and Solubilization:
 
Various biotech companies are now developing and commercializing unique water-based resources. These companies are trying to develop such unique water-based resources for various industries related to biotechnology, chemicals and pharmaceuticals. They are trying to patent this technology. This water-based resource has the ability to alter the properties of water. The ability to alter the properties of water is due to the presence of nanoparticles. Thus, this technology will help in creating unique water-based biomaterials.  
 
These companies have started commercializing such water-based products and solubilization services. These companies are trying to target the research and molecular diagnostic markets of the life science industry and are offering various solubilization services too. The new water-based material is soluble in water and other fluids.
 
The companies with the technology of water-based material also offer various solubilization services to the pharmacy and biotechnology companies. These services help the biotech and pharmacy related companies to improve the solubility and bioavailability of new and existing drugs.  
 
These solubilization services are nothing, but water-based nanotechnology, which are very much beneficial in drug delivery applications. They also increase the stability of a drug. One of the best advantages of this technology is that, it has the ability to change the physical properties of water and the nanoparticles in the technology have the capability of organizing the water molecules in its surroundings.
 
With the help of such a technology, it is now possible for many fields of science to develop bio-friendly technologies in the future. In the near future, scientists may help in preventing water crisis too. In short, this is the technology of future.
 

Nanotechnology – for All to Use, or Only for the Free (read Wealthy)?

07-07-2010 by admin

The overwhelming disparity in riches between third world countries and the more developed nations has never been more poignant that in today’s modern society. While the technology exists, in the form of rapid strides in nanotechnology, its access is limited to and concentrated on the more affluent power brokers of the world.

The innovative strides in nanotechnology have the potential control poverty, eliminate hunger, and provide safer and cleaner water for the poor as well as providing a ready cure for tropical diseases in those areas where human suffering is the hallmark of existence.

But, will this technology ever reach those who need it the most? This is the burning question that must be addressed by the controlling agents within the government, military and private sectors.

Unfortunately, history has a disquieting way of repeating itself and, traditionally, the poorer nations of the world have been last on the list for technological advances that contribute to easing their innate suffering. Rather than focusing on enveloping poorer nations within the bosom of caring and just actions, far too often the gap between the ‘haves’ and the ‘have-nots’ is ever widening.

Nanotechnology, with its promise of hope and renewal could be the solution to drastically improving the quality of life for all, if it is distributed fairly and evenly.

Nanotechnological strides are being developed in some third world countries like Brazil, India, Thailand and South Africa where millions of dollars has been earmarked to encourage the progression of research and development of nanotechnology and its promise of overwhelming advancements in environmental, agricultural, medical and sustainable natural resources. The hope is that the resulting developments will benefit rich and poor alike, thus satisfying the Millennium Development Goals as set out by the United Nations in their bid to eliminate, or at least control poverty in the poorest nations.

The more powerful scientific communities, like those in the United States, Britain and Japan lead the universal thirst for nanotechnology perfection. Yet there are those who decry the seeming objectives of these more powerful nations. They say the nations who are able to encourage the rapid strides in scientific research in nanotechnology appear to be allocating more effort into using it for military gains and covert surveillance than in benefiting the poor and disadvantaged.

It is said that if you want to see into the future, you need only look to the past. In previous decades, humanitarians put a lot of faith and hope into burgeoning technologies in biotechnology and its promise to solve world hunger via genetically modified organisms. However, the proposed benefits to the poorer nations have yet to materialize. It appears the developed nations are reaping the rewards of widely grown and readily available GMO enhanced foods which are being consumed in countries that do not have the abject poverty of the under-developed worlds.

The promise of dramatic improvement to the quality of life for the poor has yet to come to fruition. It can only be hoped that saner minds will take precedence in the development of nanotechnology and that its benefits will be shared by both rich and poor throughout the entire world.

It?s All About Understanding the Limitations in Nanotechnology Investing

05-07-2010 by admin

When nanotechnology was first described, it was considered to be an over-hyped term straight out of a science fiction novel. But over the years, as technology advanced, microscopic machines and even factories became a reality and soon nanotechnology investing was the in thing for corporate ventures.

However, in the last few years, individual investors have realized that there is very little money to be made in nanotechnology investing. Even the existing firms have not performed according to expectations and newer IPO’s haven’t really flooded the market either.

The advances made by nanotechnology has been limited to improving the quality and lifetime of existing materials like batteries, cells etc. There have been very few breakthrough products in nanotechnology.

Whether to invest or not

Here is the big question. Do you invest in nanotechnology or not?

• There are many start up ventures out there that seem to be promising enough but most of these will take years to get established.

• Hence from an investor’s point of view, it is extremely important that you gauge the landscape.

• You need to be well aware of the time frame and the constraints in the filed.

• If you are expecting to invest in some of the nanotechnology products that seem sci fi, then keep in mind that most of these products are almost 100 years away.

• Unless you have an extremely broad time frame for investing, there are better options at hand

For the corporate investor

On the other hand, nanotechnology investing might just prove to be the right thing for corporate investors.

However, keep yourself updated about the recent advances made in the filed like the classification of nanotechnology into active, passive and hybrid groups. This will help investors get a better grip on the time frame required for commercialization of the technology.

Study Uncovers Mesothelioma Link to Nanotechnology

03-07-2010 by admin

Mesothelioma has long been linked to the inhalation and exposure to asbestos fibers and dust, so when scientists uncovered an additional potential cause for this incurable form of lung cancer, the unthinkable became a reality.
According to researchers based out of the Woodrow Wilson International Centre for Scholars in Washington D. C. , the early 90′s development of carbon nanotubes has been an amazing feat for technological applications, however, it has not gone without its price. Specifically, carbon nanotubes may be causing harm to the human body in the form of mesothelioma cancer.
If the carbon nanotubes are introduced into the wrong environment, the development of lesions and inflammation of the lungs occurs – symptoms similar to that of mesothelioma cancer and asbestos exposure. Researchers uncovered the finding through exposure of carbon nanotubes to animals.
Dr. Andrew Maynard, who published a study in the journal Nature Nanotechnology, described the use of nanotubes and the potential link to mesothelioma cancer. He said that currently, nanotubes are being implemented because of their awesome abilities at conducting heat and electricity. Mostly, Dr. Maynard explains, the nanotubes are being implemented into sports equipment. He said that there are no regulations as to where nanotubes can be implemented and there are currently no requirements for the use of nanotubes to be disclosed to the general public.
What Are Nanotubes?
According to Maynard, nanotubes are a product of nanotechnology research, one he considers the “poster child” of nanotechnology. The nanotubes are cylindrical structures comprised of carbon atoms that have been rolled together. Maynard’s study found that when mice were exposed to nanotubes, they developed asbestos-induced symptoms within the lungs. While he and other researchers consider nanotubes to be safe – when encased – the risk occurs when nanotubes are incinerated or broken.
Nanotubes are currently being used in:
* a variety of sports equipment
* bicycle frames
* tennis rackets
* electronic gas detectors
* radios
Additionally, because of the strength of nanotubes, many consider its future use to vastly effect several business ventures and areas, and be widely used in industries including:
* aerospace
* automobile
* airplanes
* television box productions
* medical
* environmental uses
Working with Nanotubes
While the National Institute for Occupational Safety and Health (NIOSH) is doing research on nanotoxicology, there is little knowledge or research currently available regarding the safety of using nanotechnology. Additionally, Dr. Maynard noted that because of the ever-increasing nanotechnology industry, which is likely to be worth $2. 6 trillion by 2014, it will be difficult to adequately and accurately assess nanotechnology safety because of the technology’s quick growth, which is also being used in the food industry.
Transparency of nanotoxicology among some nanotechnologically-produced products may fall into the hands of manufacturers and producers, which John M. Balbus, health program chief for the Environmental Defense Fund who was interviewed in a Washington Post article on nanotechnology, said could either be a very good thing with open communications, or a very bad thing replicating the mistakes made among the construction industry’s use of asbestos. However, he noted that upfront communication regarding the dangers of nanotechnology with the public may increase because of the previous mistakes made by other industries in hiding mesothelioma conditions from the public.
Finding Help with Nanotube Related Mesothelioma
Individuals, especially nanotube factory workers who have previously worked with carbon nanotubes or have been exposed to the potential dangers associated with the nanotubes and developing mesothelioma should receive medical attention immediately.
It may also become necessary for these individuals to locate a law firm with knowledge of mesothelioma-related litigation in order to develop a mesothelioma lawsuit.
Because of the nature of the industry and the continued funding flooding into carbon nanotube research it is important to develop a lawsuit that will also alert others, in a similar predicament, and provide aware of the potentially serious health risks associated with nanotechnology. Further, because only 5 percent of the funding, which consists of billions of dollars annually, provided by the National Nanotechnology Institute is going toward health and safety research, it is important for individuals with nanotube-induced mesothelioma to develop a lawsuit that may offer monetary compensation to victims suffering from this irreversible and deadly lung cancer.

New Generation Reproductive Technologies (stem Cell-nanotechnology)

01-07-2010 by admin

Advances in Embryonic and Placental Development  Abstract:

Early embryonic development needs detailed investigations if we have to reduce embryonic mortality. Embryonic mortality details have been reviewed (wani, 2005). The reproductive abnormalities have been discussed and a sequential photographic presentation of embryonic mortality have recently been published (Khatoon et al 2007). The critical period when maximum embryonic losses go unnoticed is the period before attachment. Losses before actual union of foeto-maternal tissues can be missed and calculations of embryonic mortality estimates remain unaccounted for. Some recent studies of (Wani 2006, Khatoon et al 2006) have paved a new innovative model for investigation on foeto-maternal development and its attachment. This paper describes the detailed embryonic development, blastocyst elongation, formation of cotyledons within elongated blastocyst, their ramifications and networking of vasculature and formation of foetal placental unit.

Second and 3rd generation animal biotechnologies as reviewed (Wani, 2005) are multiple ovulation, embryo-transfer, preservation, cloning, micromanipulation splitting of embryos and nuclear transfer. The 4th Generation reproductive technologies have advance beyond our imagination and now we do have transgenic goats giving milk rich in insulin.

The application of this advancement for diagnostic, therapeutic and economic uses especially its transfer to human medicine or for field application in animal industry needs further research and evaluation.

The another fact which can be of importance is the number of cells per embryos. During first day these may be two cells but after 8 days the cell number increases to 120 or more. It takes 32 hours for the oocyst after fertilization to reach the two cell embryo. Another 13 hours are needed to develop it into a four cell embryo.

The study reveals links to nanotechnology Mesothelioma

29-06-2010 by admin


Mesothelioma has been endorsed by the inhalation and exposure to asbestos fibers and dust, so when scientists found a potential cure for lung cancer leads to an additional, unimaginable a reality. According to the Woodrow Wilson International Center in Washington, DC, 90 the early development of carbon nanotubes, researchers and scholars has been the amazing feat of technology, but not without a price. Specifically, carbon nanotubes can cause damage to human mesothelioma cancer.  He said there are provisions in nanotubes can be implemented, not yet require the use of nanotubes themselves to the general public. What is a nanotube? It Maynard, nanotubes nanotechnology research, in his view, a model of nano-technology “products. Nanotubes of the carbon has been rolled up.Nanotubes used today: * There are many sports * Table Rental * Tennis rackets * Electronic gas detectors * Radio In addition, carbon nanotubes, which many people believe that in the future use of a number of different companies and business strength, and is widely used in industry, including: * Aerospace * Automotive Aircraft * * Panel TV Production * Medical * Environmental use And carbon nanotubes Although the National Institute for Occupational Safety and Health (NIOSH) research study is being nanotoxicología, few have the knowledge or the use of nanotechnology research currently available security. In addition, only 5 funds, including billions of dollars each year National Nanotechnology Institute, by Research to health and safety of individuals with mesothelioma, an important requirement in the development of carbon nanotubes induced, can provide compensation to victims who suffered such an irreversible, fatal form of lung cancer.

Nanotechnology – a revolution in medicine

27-06-2010 by admin


In recent years, has been tremendous development in the field of nanotechnology. Nanotechnology is a scientific field of application and construction machinery and micro-level roaming agreements. Since the development of nanotechnology, there were many in the scientific development in all areas, especially in the field of medicine. With the help of nanotechnology, a complex heart surgery to achieve is possible. Doctors are already using nano-robots to treat certain diseases. These nano-robots will also help to correct certain diseases in the human body. Nanotechnology in Drug Development: Recently, scientists are developing better and effective drug delivery systems using nanotechnology. The scientists are using nanoparticles to create a drug-transit system, can improve the drug properties and therapeutic drugs to help improve the process, such as narcotics. Nanaoparticles significant performance, greatly improved medicines management.  An event such as nano-technology transfer in the cytoplasm of drug through the cell membrane. This is an important advance because it will prevent the body from certain diseases, drugs have entered the cell membrane. Because in the body, which requires an effective drug molecules positive response. So scientists are using nanotechnology. Scientists are using nanotechnology developed drugs will automatically be activated once you enter the body. Many researchers believe that this is a drug delivery system can be developed, may prove to be on the treatment of cancer and infectious diseases, beneficial use of nanotechnology. There are so many drug delivery systems developed to the field in place, researchers believe, in the near future, nano-functional drugs will have a tremendous progress and truth produce nano-medicine.

 

September 2010
M T W T F S S
« Aug    
 12345
6789101112
13141516171819
20212223242526
27282930  
UK Dedicated Servers